Small Pumpkin Mold kit for Growing Pumpkin and Watermelon on Halloween

We design and manufacture plastic fruit molds which can shape growing fruits or vegetables such as watermelons, pumpkins, cucumbers, gourds and strawberries into lovely shapes, what we do promise is that every time when you open a fully shaped mold.     you will say "oh my god,this is incredible" .

The big mold inner size is (22cmx16cmx16cm) 9"x6.3"x6.3" and small mold size is (14cmx10cmx10cm) 5.5"x4"x4" .

Connecting the mold with bolts and nuts (M8x20mm)which is not included on the package ,need to prepare them by yourself.

The mold are made of polycarbonate which is very durble material ,very good quality which can be used for many times and many years .

The mold has many small holes on the surface which designed for releasing the heat and mositure from the mold .The mold is clear color ,so it will not effect the quality of the pumpkin .

Successful story from a UK buyer :

One Frankenstein shape pumpkin sell with USD 125 each in local market . 

How to use the mold :

1. Choose these pumpkin variety that weigh from 22 to 32lb in round shapes .
2. Place the pumpkin in the mold (place face part mold under the pumpkin will be getting a better shapes since the weight pushing down filled the nose and all in well ) when it is just bit smaller than the mold (or between 10-13cm in diameter ), but as big as possible ,this will make sure the pumpkin is strong enough to against the hot and wet condition inside of the mold and prevent stop growing or rotting inside.
3. When removing the mold from pumpkins, loosen the bolts a little (1/32 of an inch or less) and wait for the pressure to slowly release from the pumpkin and lightly tap the molds so they release very slowly , because it has the possibility that the formed pumpkins split in half ,like 10 percent splits if not doing like that , or picking them and letting them sit for a day or so and dry a little before trying to remove would stop the split happening .
4. To getting the pumpkin out of the mold , you can slowly or lightly knock the edge of the mold (carefully not to touch the pumpkin otherwise it will hurt it) to loosen the mold . 

Additional : 

Our mold can also be used to make wax candle ,just like below from Jim seamons :